LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 442 (Interior Trim And Interior Paneling) >> Repair Instructions >> Rear Quarter Trim Panel Replacement - Left Side (Extended Wheelbase w/E61)

Rear Quarter Trim Panel Replacement - Left Side (Extended Wheelbase w/E61)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Body Side Trim Panel Assembly & Retainers
GM1689375Courtesy of GENERAL MOTORS COMPANY
Rear Quarter Trim Panel Replacement - Left Side (Extended Wheelbase w/E61)

Callout Component Name

Preliminary Procedures

  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the third row seats. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) .
  3. Remove the rear opening garnish molding. Refer to Rear Door Upper Garnish Molding Replacement .
  4. Remove the back rear corner upper garnish molding. Refer to Body Rear Corner Garnish Molding Replacement - Left Side (With E61) , Body Rear Corner Garnish Molding Replacement - Left Side (Without E61) .
  5. Remove the rear side door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Extended Wheelbase) , Rear Side Door Sill Trim Plate Replacement (Standard Wheelbase) .
  6. Remove the body side lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Standard Wheelbase) , Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) , Body Lock Pillar Garnish Molding Replacement (Extended Wheelbase) .
1 Body Side Trim Panel Assembly
TIP:  Align the locators to the body side inner panel prior to engaging the retainers.
2 Body Side Trim Panel Retainer (Qty: 10)