LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 441 (Bumpers And Fascias) >> Repair Instructions >> Front Bumper Impact Bar Replacement

Front Bumper Impact Bar Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Impact Bar & Bolts
GM1751811Courtesy of GENERAL MOTORS COMPANY
Front Bumper Impact Bar Replacement

Callout Component Name
Preliminary Procedure 
Remove the front fascia. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , Front Bumper Fascia Replacement (Z71) .
1 Front Impact Bar Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
160 N.m (118 lb ft)
2 Front Impact Bar