LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Weatherstrip Replacement

Liftgate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Lift Gate Weatherstrip
GM1684634Courtesy of GENERAL MOTORS COMPANY
Liftgate Weatherstrip Replacement

Callout Component Name
Preliminary Procedure 
Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement .
1 Liftgate Weatherstrip
TIP:  Locate the paint dot on the upper portion of the weatherstrip directly below the electrical pass through. Roll the weatherstrip from the center to the upper corners. Roll the weather strip from the upper corners to the lower corners. Roll the weatherstrip from the lower corners to the center.