Front Side Door Wiring Conduit Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Conduit Grommet & Electrical Connector

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .
1	Electrical Connector Procedure Mark the location and the color of the wires to the electrical socket before removing the wires. Disconnect the door wiring harness electrical connector from the body harness. Remove the wiring harness wiring one at a time from the conduit. Remove the wiring harness from the rubber conduit.
2	Conduit Grommet

Callout

Component Name

Preliminary Procedure
Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .

Electrical Connector

Procedure

Mark the location and the color of the wires to the electrical socket before removing the wires.
Disconnect the door wiring harness electrical connector from the body harness.
Remove the wiring harness wiring one at a time from the conduit.
Remove the wiring harness from the rubber conduit.

Conduit Grommet