LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Door Opening Weatherstrip Replacement (Regular Cab) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement .
    2. Fig 1: Removing/Installing Pinch-Weld Flange Weatherstrip (Front Door Opening)
    GM686582Courtesy of GENERAL MOTORS COMPANY
  2. Remove the weatherstrip from the pinch-weld flange.
scientia non olet · About LEMON Manuals