LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Endgate Weatherstrip Replacement

Endgate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Endgate Weatherstrip
GM1817768Courtesy of GENERAL MOTORS COMPANY
Endgate Weatherstrip Replacement

Callout Component Name
1 Endgate Weatherstrip
  1. Seat and align the weatherstrip carrier end left to top of flange left side.
  2. Seat and align the weatherstrip carrier end right to top of flange right side.
  3. Load the weatherstrip center flush with the center of the flange.
  4. Stuff and set remaining weatherstrip working downward and inward toward the center.