Rear Axle Shaft Seal and/or Bearing Replacement: Notes

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8092 Driver Handle
J 2619-01 Slide Hammer
J 29709 Wheel Bearing Installer (9. See Special Tools .5 inch Axle)
J 29713 Axle Seal Installer (9. See Special Tools .5 inch Axle)
J 44685 Rear Axle Seal and Bearing Remover. See Special Tools .