LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Rear Drive Axle) >> Repair Instructions >> Lubricant Replacement - Rear Drive Axle >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Rear Drive Axle Fill Plug
    GM913433Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear axle fill plug.
    3. Fig 2: Locating Rear Axle Drain Plug
    GM390113Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear axle drain plug.
  4. Drain the lubricant into a suitable container.
  5. Inspect the drain plug for excessive metal particle accumulation. This accumulation is symptomatic of extreme wear.
  6. Clean the drain plug.
scientia non olet · About LEMON Manuals