Circuit/System Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
When the BCM receives a signal to command the courtesy lamps ON, it applies battery voltage through the dome/courtesy lamps control circuit to the courtesy lamps. The door sill illumination receives voltage through the courtesy lamps circuit. The door sill illumination harness connector includes a power inverter which converts the battery voltage to 150 V AC (550 Hz). This AC voltage is supplied to the door sill lamps and causes them to illuminate.