LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (Lighting System) >> Diagnostic Information and Procedures >> DTC B3600 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

B3600 03 

The BCM detects a voltage that is lower than 0.10 V on the I/P lamp dimmer switch signal circuit.

B3600 07 

The BCM detects a voltage that is higher than 4.97 V on the I/P lamp dimmer switch signal circuit.