LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Wiper System And Washer System) >> Repair Instructions >> Rear Window Wiper Arm Parking Ramp Replacement

Rear Window Wiper Arm Parking Ramp Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Window Wiper Arm Park Ramp & Nut
GM1669962Courtesy of GENERAL MOTORS COMPANY
Rear Window Wiper Arm Parking Ramp Replacement

Callout Component Name

Preliminary Procedure

  1. Open the liftgate.
  2. Remove the interior liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
1 Rear Window Wiper Arm Park Ramp Nut
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Rear Window Wiper Arm Park Ramp
TIP:  Upon installation, align the pin in the rear of the ramp to the hole in the liftgate outer panel.