Rear Window Washer Pump Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Windshield Washer Pump Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the windshield washer container. Refer to Windshield Washer Solvent Container Replacement . Using 2 flat-bladed tools, gently pry the rear washer solvent pump from the front side of the washer container. Discard the old rear washer solvent pump grommet.
1	Rear Windshield Washer Pump Assembly TIP: Discard the old grommet and use the new grommet in the kit.

Callout

Component Name

Preliminary Procedures

Remove the windshield washer container. Refer to Windshield Washer Solvent Container Replacement .
Using 2 flat-bladed tools, gently pry the rear washer solvent pump from the front side of the washer container.
Discard the old rear washer solvent pump grommet.

Rear Windshield Washer Pump Assembly
TIP: Discard the old grommet and use the new grommet in the kit.