LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 436 (Exterior Trim) >> Repair Instructions >> Radiator Grille Emblem/Nameplate Replacement (PLATINUM)

Radiator Grille Emblem/Nameplate Replacement (PLATINUM)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Radiator Grille Emblem/Nameplate
GM2039436Courtesy of GENERAL MOTORS COMPANY
Radiator Grille Emblem/Nameplate Replacement (PLATINUM)

Callout Component Name
Preliminary Procedure 
Remove the front bumper fascia assembly. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , Front Bumper Fascia Replacement (Z71) .
1 Radiator Grille Emblem Assembly Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
Hand tighten the screws.
2 Radiator Grille Emblem Assembly