Radiator Grille Emblem/Nameplate Replacement (Chevrolet Tahoe Two-mode Hybrid)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Radiator Grille Emblem/Nameplate Replacement (Chevrolet Tahoe Two-mode Hybrid)
| Callout | Component Name |
|---|---|
|
CAUTION:
Preliminary Procedure Remove the radiator upper grille. Refer to Radiator Upper Grille Replacement (Chevrolet Tahoe Two-mode Hybrid) , Radiator Upper Grille Replacement (PLATINUM) .Refer to Exterior Trim Emblem Removal Caution . |
|
| 1 | Radiator Grille Emblem Assembly Nut (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 1.5 N.m (13 lb in) |
| 2 | Radiator Grille Emblem Assembly TIP: Ensure the foam tape is on the emblem for installation. |