LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Front Suspension) >> Repair Instructions >> Spring Bumper Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spring bumper.
    2. NOTE: Refer to Fastener Notice .
  2. Install the nut to the spring bumper stud.

    Tighten:  Tighten the nut to 30 N.m (22 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals