LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Front Suspension) >> Repair Instructions >> Lower Ball Joint Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Use the outer flange of the ball joint in order to press the ball joint into place.
  1. Install the new ball joint using a press.
  2. Install the lower control arm. Refer to Lower Control Arm Replacement .
  3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Remove the safety stands.
  5. Lower the vehicle.
  6. Verify the wheel alignment. Refer to Wheel Alignment Specifications .
scientia non olet · About LEMON Manuals