LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Disc Brakes) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement .
    4. Fig 1: Front Disc Brake Splash Shield Components
    GM371077Courtesy of GENERAL MOTORS CORP.
  4. Remove the splash shield.
scientia non olet · About LEMON Manuals