Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Ref No.* | Quantity | Size | Specification | |
|---|---|---|---|---|---|
| Metric | English | ||||
| Auxiliary Fluid Cooler Bolts | - | - | - | 12 N.m | 106 lb in |
| Case Extension to Case Assembly | 16 | 6 | M10x1.5x40 | 55 N.m | 41 lb ft |
| Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly | 310 | 6 | M5x0.8x55 | 8 N.m | 71 lb in |
| Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly | 309 | 10 | M5x0.8x45 | 8 N.m | 71 lb in |
| Control Solenoid Valve Heat Sink to Valve Body | 312 | 2 | M5x0.8x53 | 8 N.m | 71 lb in |
| Control Valve Upper Body Assembly to Control Valve Lower Body Assembly | 301 | 12 | M5x0.8x36 | 8 N.m | 71 lb in |
| Control (with Body and Valve) Valve Assembly to Case Assembly | 22 | 6 | M5x0.8x73 | 8 N.m | 71 lb in |
| Floor Shift Control Indicator Screw | - | - | - | 2.5 N.m | 22 lb in |
| Floor Shift Control Lever Bolt | - | - | - | 9 N.m | 80 lb in |
| Floor Shift Control Lever Knob Screw | - | - | - | 6 N.m | 53 lb in |
| Fluid Filler Tube Nut | - | - | - | 18 N.m | 13 lb ft |
| Fluid Pan Assembly to Case Assembly | 30 | 18 | M6x1.0x20 | 9 N.m | 80 lb in |
| Fluid Pump Cover Assembly to Torque Converter Housing | 231 | 13 | M6 1.0x40 | 11 N.m | 97 lb in |
| Fuel Pipe Bracket Screw | - | - | - | 9 N.m | 80 lb in |
| Heat Shield to Transmission Bolts | - | - | - | 17 N.m | 13 lb ft |
| Input and Output Speed Sensor Assembly to Control Valve Upper Body Assembly | 302 | 2 | M6x1.0x20 | 12 N.m | 106 lb in |
| Line Pressure Test Hole Plug to Torque Converter Housing | 202 | 1 | 1/8-27 NPTF | 11 N.m | 97 lb in |
| Manual Shaft Detent Assembly to Valve Body | 23 | 1 | M6x1.0x14.5 | 12 N.m | 106 lb in |
| Range Selector Lever to Transmission | - | - | - | 25 N.m | 18 lb ft |
| Range Selector Lever Cable Bracket Bolts | - | - | - | 22 N.m | 16 lb ft |
| Torque Converter Cover Bolts | - | - | - | 12 N.m | 106 lb in |
| Torque Converter Housing Assembly to Case Assembly | 3 | 9 | M10x1.5x50 | 72 N.m | 53 lb ft |
| Torque Converter to Flex Plate Bolts | - | - | - | 65 N.m | 48 lb ft |
| Transmission to Engine Bolts | - | - | - | 50 N.m | 37 lb ft |
| Transmission Electrical Harness Retaining Screw | - | - | - | 9 N.m | 80 lb in |
| Transmission Fluid Cooler Pipe Bracket Bolt | - | - | - | 22 N.m | 16 lb ft |
| Transmission Mount to Crossmember Nuts | - | - | - | 55 N.m | 40 lb ft |
| Transmission Mount to Transmission Bolts | - | - | - | 67 N.m | 50 lb ft |
| *Reference number refers to the component callout number in Disassembled Views | |||||