X112 Engine Harness to Camshaft Position Sensor Jumper Harness (except 6.0L)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Connector Part Information Harness Type: Engine OEM Connector: 12110293 Service Connector: 12118025 Description: 3-Way F Metri-Pack 150 Series Sealed (BK)	Connector Part Information Harness Type: Camshaft Position Sensor Jumper OEM Connector: 12129615 Service Connector: 15305889 Description: 3-Way M Metri-Pack 150 Series Sealed (BK)
Terminal Part Information Terminal: 12048074/2 Core/Insulation Crimp: E/1 Release Tool/Test Probe: 35616-2A (GY)	Terminal Part Information Terminal: Pending Core/Insulation Crimp: Pending Release Tool/Test Probe: Pending

Pin	Wire	Circuit	Function	Pin	Wire	Circuit	Function
A	0.35 D-BU	6259	5-Volt Reference	A	0.35 D-BU	6259	5-Volt Reference
B	0.35 BN	6266	Low Reference	B	0.35 BN	6266	Low Reference
C	0.35 D-BU/WH	6265	Camshaft Position (CMP) Sensor Signal	C	0.35 D-BU/WH	6265	Camshaft Position (CMP) Sensor Signal