Rear Case Installation
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Rear Case Installation
| Callout | Component Name |
|---|---|
| 1 | A/Trans Rear Case Gasket TIP: Verify that the sun gear - 3rd position is on the sun gear shaft assembly - 3rd position. |
| 2 | A/Trans Rear Case Assembly TIP: Be cautious of the park pawl rod, making sure it is lined up accurately thru the rear case assembly. |
| 3 | A/Trans Rear Case Bolt M8 x 1.25 x 30 (Qty: 12)
CAUTION:
Refer to Fastener Caution . Tighten Tighten bolt to 24-29 N.m (18-21 lb ft). |