Park Pawl Replacement: Removal
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Removal
| Callout | Component Name |
|---|---|
| 1 | Park Pawl Cover Bolt M6 x 1.0 x 20 (Qty: 5) |
| 2 | Park Pawl Cover |
| 3 | Park Pawl Cover Gasket |
| 4 | Park Pawl Actuator Guide Pin |
| 5 | Park Pawl Actuator Guide TIP: Push the park pawl into housing in order to remove the park pawl actuator guide. |
| 6 | Park Pawl Shaft Hole Plug |
| 7 | Park Pawl Shaft |
| 8 | Park Pawl |
| 9 | Park Pawl Spring |