Output Speed Sensor and Case Extension Removal
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Output Speed Sensor and Case Extension Removal
| Callout | Component Name |
|---|---|
| 1 | A/Trans Rear Case Bolt M10 x 1.5 x 45 (Qty: 6) |
| 2 | 2WD Output Housing Extension Assembly TIP: There is also a 4WD option with bolts and torque sequence the same as the 2WD. |
| 3 | Gasket (2WD Outlet Only) |
| 4 | Vehicle Speed Sensor Bolt |
| 5 | A/Trans Output Speed Sensor Assembly |
| 6 | A/Trans Output Speed Sensor O-Ring Seal |