LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Automatic Transmission - 2ML70 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Assembly Assemble >> Control Valve Body, Upper and Lower Assembly

Control Valve Body, Upper and Lower Assembly

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Control Valve Body, Upper And Lower Assembly
GM1873650Courtesy of GENERAL MOTORS CORP.
Control Valve Body, Upper and Lower Assembly

Callout Component Name
CAUTION:

Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required sequencing may result in transmission malfunction.
1 A/Trans Manual Shift Shaft Position Switch Assembly Bracket
2 Control Valve Channel Plate Bolts M6 x1.0 x 35 (Qty: 19)
TIP:  Hand tighten only.
scientia non olet · About LEMON Manuals