LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Antilock Brake System With TCS) >> Diagnostic Information and Procedures >> DTC C0035-C0051 >> Diagnostic Aids >> C0035 C0040 C0045 C0050 >> C0036 C0041 C0046 C0051

C0036 C0041 C0046 C0051

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Under the following conditions, 2 Wheel Speed Sensor Input is 0 DTCs are set:

Diagnose each wheel speed sensor individually.



A possible cause of this DTC is electrical noise on the wheel speed sensor harness wiring. Electrical noise could result from the wheel speed sensor wires being routed to close to high energy ignition system components, such as spark plug wires.