LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Seat Switch Bezel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
  1. Remove the screws retaining the power seat switch bezel.
  2. Disconnect the electrical connectors.
  3. Remove the lumbar support switch.
  4. Remove the power seat adjuster switch assembly.
scientia non olet · About LEMON Manuals