LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Seat Back Cover Replacement - Rear Folding >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Folding Seat Panel
    GM660330Courtesy of GENERAL MOTORS CORP.
  1. Fold the seat forward.
  2. Grab the seat back cover and pull up to release the clips.
  3. Remove the rear seat back cover.
scientia non olet · About LEMON Manuals