LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Rear Seat Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold the seat cushions forward to access the seat retaining bolts.
  2. Disconnect the electrical connectors, if equipped.
  3. Remove the seat retaining bolts.
  4. Fold the seat cushions back to the closed position.
    5. Fig 1: Rear No. 1 Seat
    GM833553Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals