LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Rear Seat Cushion Frame Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Cushion Frame Components
    GM276326Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion frame (5).
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts to the hinge assembly.

    Tighten:  Tighten the bolts to 7 N.m (61 lb in).

  3. Install the seat cushion trim cover (8) and the pad (7). Refer to Rear Seat Cushion Cover and Pad Replacement .
scientia non olet · About LEMON Manuals