LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Rear Seat Back Cushion Frame Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Back Frame Components
    GM276335Courtesy of GENERAL MOTORS CORP.
  1. Remove the seat from the vehicle. Refer to Rear Seat Replacement  or Rear Number 2 Seat Replacement .
  2. Remove the armrest, if equipped. Refer to Rear Seat Armrest Replacement .
  3. Partially remove the seat-back cover in order to gain access to the retaining bolts. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  4. Remove the bolts from the seat-back frame.
  5. Remove the seat-back frame (4) from the seat back cushion frame.
scientia non olet · About LEMON Manuals