LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Head Restraint Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Head Restraint
    GM867067Courtesy of GENERAL MOTORS CORP.
  1. Pull the head restraint to the full height position.
  2. Insert a pointed tool into the access hole (1) and press inwards.
  3. Pull the head restraint from the seat.
  4. Disconnect the video connector if the head restraint is equipped with the video display.
scientia non olet · About LEMON Manuals