LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Head Restraint Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the video connector if the head restraint is equipped with the video display.
    2. Fig 1: Head Restraint
    GM867067Courtesy of GENERAL MOTORS CORP.
  2. Install the head restraint by pushing down on restraint until the restraint is fully seated.
  3. Pull up in order to ensure that the head restraint engages with the head restraint retainers (1).
scientia non olet · About LEMON Manuals