LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Front Seat Trim Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the seat is in the full upward position.
    2. Fig 1: View Of Front Seat Trim Panel
    GM833483Courtesy of GENERAL MOTORS CORP.
  2. Remove the trim panel (1) by pulling outward in order to disengage the retaining clip.
  3. Remove the screws retaining the seat back release handle and the seat recliner handle and remove the handles, if equipped.
  4. Remove the trim panel from the seat.
scientia non olet · About LEMON Manuals