LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Front Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Bucket Seat
    GM363709Courtesy of GENERAL MOTORS CORP.
  1. Move the seat to the full rearward position. Remove the front seat nut cover (3).
  2. Remove the seat retaining front nuts (1).
  3. Move the seat to the full forward position in order to remove the seat retaining rear bolts (2).
  4. Disconnect the electrical harness.
  5. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals