LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Front Seat Cushion Frame Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
  2. Remove the seat cushion trim cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
    3. Fig 1: View Of Lumbar Cable And Front Seat Cushion Frame Components
    GM407184Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components from the seat cushion frame:
    • The frame springs (1)
    • The frame suspension (2)
    • The plastic retainers (3)
  4. Remove the seat cushion frame from the vehicle.
scientia non olet · About LEMON Manuals