LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Front Seat Cushion Frame Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Lumbar Cable And Front Seat Cushion Frame Components
    GM407184Courtesy of GENERAL MOTORS CORP.
  1. Install the following components to the seat cushion frame:
    • The plastic retainers (3)
    • The frame suspension (2)
    • The frame springs (1)
  2. Install the seat cushion trim cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
  3. Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
scientia non olet · About LEMON Manuals