LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Front Seat Adjuster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
  3. Remove the seat cushion frame from the seat adjuster. Refer to Front Seat Cushion Frame Replacement .
    4. Fig 1: View Of Seat Belt Buckle, Nut & Electrical Connection
    GM381486Courtesy of GENERAL MOTORS CORP.
  4. Remove the inboard seat belt buckle and nut (1).

    Disconnect the electrical connection (2).

  5. Remove the seat back frame from the seat adjuster. Refer to Front Seat Back Frame Replacement .
  6. Remove the seat back hinge/recliner mechanism. Refer to Front Seat Back Hinge and Recliner Mechanism Replacement .
  7. Remove the seat adjuster track cover. Refer to Front Seat Adjuster Track Finish Cover Replacement .
  8. Remove the memory module, if equipped. Refer to Memory Seat Control Module Replacement .
scientia non olet · About LEMON Manuals