Section 399 (Engine Mechanical - 5.3L, 6.0L & 6.2L - Description And Operation)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Crankcase Ventilation System Description
- Drive Belt System Description
- Engine Component Description
- The 4.8, 5.3, 6.0, and 6.2 Liter V8 Engines
- Camshaft and Drive System
- Crankshaft
- Cylinder Heads
- Engine Block - RPO LC9/L94/L9H
- Engine Block - RPO LMG/L96
- Exhaust Manifolds
- Intake Manifold
- Oil Pan
- Piston and Connecting Rod Assembly
- Valve Rocker Arm Cover Assemblies
- Valve Train - RPO L96/L9H
- Valve Train - RPO LC9/LMG/L94
- Cylinder Deactivation (Active Fuel Management) System Description
- Camshaft Position Actuator and Solenoid Valve Description
- New Product Information
- Lubrication Description (with Active Fuel Managment)
- Lubrication Description (without Active Fuel Management)
- Lubrication Description - Main Pressure Below 55 psi with Cylinder Deactivation (Active Fuel Management) Off
- Lubrication Description - Main Pressure Above 55 psi with Cylinder Deactivation (Active Fuel Management) Off
- Lubrication Description - Main Pressure Below 55 psi with Cylinder Deactivation (Active Fuel Management) On
- Lubrication Description - Main Pressure Above 55 psi with Cylinder Deactivation (Active Fuel Management) On
- Cleanliness and Care
- Separating Parts
- Replacing Engine Gaskets
- Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
- Tools and Equipment