Installation Procedure
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Install the right floor air outlet duct (4) to the HVAC module assembly (2).
- Install the screw (5) to the right floor air outlet duct (4).
Tighten: Tighten the screw to 1.6 N.m (14 lb in).
- Install the right I/P insulator panel. Refer to Instrument Panel Insulator Replacement .
NOTE:
Refer to Fastener Notice
.