LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - Description And Operation) >> Description and Operation >> Fuel System Description (Without LC8) >> Fuel Tank Fuel Pump Module Assembly

Fuel Tank Fuel Pump Module Assembly

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Fuel Sender Assembly
GM1244325Courtesy of GENERAL MOTORS CORP.

The front fuel tank fuel pump module on dual tank applications consists of the following major components:

Fig 2: Rear Fuel Sender Assembly
GM645600Courtesy of GENERAL MOTORS CORP.

The rear fuel tank fuel pump module on dual tank applications consists of the following major components:

Fig 3: Fuel Sender Assembly
GM1244325Courtesy of GENERAL MOTORS CORP.

The fuel tank fuel pump module assembly on single tank applications consists of the following major components: