LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - Description And Operation) >> Description and Operation >> Fuel System Description (Without LC8) >> Fuel Pump Flow Control Module (FPCM)

Fuel Pump Flow Control Module (FPCM)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pump flow control module (FPCM) is a serviceable GMLAN module. The FPCM receives the desired fuel pressure message from the engine control module (ECM) and controls the fuel pump located within the fuel tank to achieve the desired fuel pressure. The FPCM sends a 25 KHZ PWM signal to the fuel pump, and pump speed is changed by varying the duty cycle of this signal. Maximum current supplied to the fuel pump is 15 amps. A liquid fuel pressure sensor provides fuel pressure feedback to the FPCM.

scientia non olet · About LEMON Manuals