LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Transfer Case - BW 4485-Nr3) >> Repair Instructions - On Vehicle >> Transfer Case Rear Extension Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Cadillac Escalade EXT, 2011 Cadillac Escalade ESV, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear output shaft seal. Refer to Rear Output Shaft Seal Replacement .
    2. Fig 1: Rear Output Shaft Bushing
    GM1549519Courtesy of GENERAL MOTORS CORP.
  2. Using J 45380 , remove the rear output shaft bushing.
scientia non olet · About LEMON Manuals