LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 373 (Propeller Shaft And Universal Joints) >> Description and Operation >> Propeller Shaft Description and Operation >> Center Bearing Description

Center Bearing Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Center bearings support the driveline when using 2 or more propeller shafts. The center bearing is a ball bearing in a rubber cushion that attaches to a frame crossmember. The manufacturer lubricates the bearing and seals the bearing. The cushion allows vertical motion at the driveline and helps isolate the vehicle from vibration.

scientia non olet · About LEMON Manuals