LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Front Drive Axle) >> Repair Instructions >> Gear Tooth Contact Pattern Inspection >> Drive Side Toe - Coast Side Toe Contact Pattern

Drive Side Toe - Coast Side Toe Contact Pattern

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Side Toe - Coast Side Toe Contact Pattern
GM569608Courtesy of GENERAL MOTORS CORP.

Condition 

The backlash is incorrect. The ring gear is too close to the drive pinion.

Correction 

Increase the backlash. Move the ring gear away from the drive pinion by adjusting the side bearing adjuster sleeves. Refer to Backlash Inspection and Adjustment .