LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Front Drive Axle) >> Repair Instructions >> Gear Tooth Contact Pattern Inspection >> Drive Side Heel - Coast Side Toe Contact Pattern

Drive Side Heel - Coast Side Toe Contact Pattern

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Side Heel - Coast Side Toe Contact Pattern
GM569610Courtesy of GENERAL MOTORS CORP.

Condition 

The pinion depth is incorrect. The drive pinion is too far away from the ring gear.

Correction 

Adjust the pinion depth of drive pinion. Refer to Pinion Depth Adjustment (8.6, 9.25 Inch Axle) .