LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Front Drive Axle) >> Repair Instructions >> Front Drive Axle Inner Shaft Seal Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front drive axle inner shaft from the inner shaft housing. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement .
    3. Fig 1: Front Drive Axle Inner Shaft Seal
    GM2529101Courtesy of GENERAL MOTORS CORP.
  3. Install the front drive axle inner shaft housing in a vise.
  4. Using the appropriate tool, remove the front drive axle inner shaft seal (1).
scientia non olet · About LEMON Manuals