LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 371 (Hybrid/EV Cooling System) >> Diagnostic Information and Procedures >> DTC P0A7E or P1ABE >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC P0A80, P0A81 or P0BBD is not set.
  2. Ignition ON, observe the scan tool BECM hybrid battery temperature parameters. The readings should be between -39 and +95°C (-38.2 and +203°F) with no greater than a 15°C (59°F) difference between any of the four temperature sensor readings. Refer to Temperature Versus Resistance .
scientia non olet · About LEMON Manuals