LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 371 (Hybrid/EV Cooling System) >> Diagnostic Information and Procedures >> DTC P0A01-P0A03 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running, observe the scan tool DMCM Coolant Temperature Signal parameter. The reading should be between -61 to +161°C (-77.8 to +321.8°F) depending on the current ambient temperature and the vehicle operating conditions.
  2. Operate the vehicle within the Conditions for Running the DTC.
scientia non olet · About LEMON Manuals