LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (Engine Controls And Fuel - Hybrid (LZ1) - DTC P0010 Through DTC P0341) >> Diagnostic Information and Procedures >> DTC P0069 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
BARO Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON
Parameter Normal Range:  64-103 kPa (Varies with altitude)
5-Volt Reference 0 kPa 0 kPa 128 kPa
BARO Sensor Signal 0 kPa 0 kPa 128 kPa
Low Reference - 124 kPa -
MAP Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine running, transmission in Park or Neutral
Parameter Normal Range:  20-48 kPa (Varies with altitude)
5-Volt Reference 0 kPa 0 kPa 127 kPa
MAP Sensor Signal 0 kPa 0 kPa 127 kPa
Low Reference - 124 kPa -