Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Connectors & Overhead Console (Full Length)

Courtesy of GENERAL MOTORS CORP.

Remove the overhead console to expose the garage door opener panel.

Fig 2: Garage Door Module Screws

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the garage door module.

Fig 3: Button & Module Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the garage door opener.
Remove the button and module assembly from the over head console.