LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - DTC P0443 Through DTC P3449 And Troubleshooting) >> Diagnostic Information and Procedures >> DTC P2544 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • DTC P2544 is an informational DTC.
  • Diagnose all other engine control module DTCs prior to DTC P2544.
  1. Verify there are no other engine control module or communication DTCs set.
    • If a DTC is not set 
  2. Complete the diagnosis by looking for an intermittent CAN circuit fault. Refer to Scan Tool Does Not Communicate with High Speed GMLAN Device .
    • If an intermittent CAN circuit fault is found 

      Repair as necessary.

    • If an intermittent CAN circuit fault is not found 
  3. All OK.
scientia non olet · About LEMON Manuals